3Dman Filament Welder Connector, Broken Filament Connector Sensor for 1.75 mm Filament 3D Printers (Red)

Produktbeschreibung

• Refuse filament waste If the filament is disconnected during printing, or there is surplus material after printing, which is not enough to print a model, it can be connected to continue printing.
• NOTE The nylon displayed in pictures is just for reference ,NOT included in the package.
• NOTE Filament often lose water and become brittle when exposed to the air for a long time. In order to prevent the filament from becoming brittle, please keep it sealed.
• FRQ why is the received connector aperture larger than the standard 1.75? A when using the lighter to heat, the consumables expand when they meet the heat, so the aperture needs to be designed a little larger, otherwise the connection is not easy to s d;
• FRQ why is the aperture of the connector received larger at one end and smaller at the other end? Is it not done well in the factory? A when connecting, please push from the small end to the large end. This is the design of the connector.
• FRQ why can't I get it all right? A please check if the Filaments are damp and of the same material. Take a look at the video and practice more. I believe most of the clients will s d.